Along with providing demand service, we offer precision tune-ups and Energy Savings Agreements for both your home and business. For more details see the ESA Benefits section below.
ESA BENEFITS
| Features: |
Benefits: |
| Clean condenser coil and test for coil damage or leaks |
Dirt, grass or any foreign material on the condenser coil reduces the ability of heat transfer so unit has to run longer and costs more money to operate.
|
|
| Monitor operating pressures |
Improper refrigerant charge could damage your compressor or lower the efficiency of your system and cause high electric bills. |
| Clean or replace filters |
Dirty or blocked filters can cause reduced airflow, high utility bills and shorten the life of the compressor, damaging the system. |
| Test compressor and motors for proper voltage and amperage |
This helps extend the life of your compressor and other major electrical components of the system. |
| Test all safety features |
This is essential for proper equipment operation and ensures you that your system will shut down if there is a harmful or unsafe problem. |
| Lubricate moving parts per manufacturers specifications |
Improper lubrication causes components to drag and create an electrical overload which results in higher electric bills and equipment failure. |
Program and calibrate thermostats (if existing thermostat can be calibrated)
|
Improperly programmed or calibrated thermostats can call for more or less heating or cooling than desired for comfort levels. Also results in high utility bills.
|
| Examine ducts for leaks and proper air flow |
Duct leaks in non-conditioned areas will cause poor system performance and improper heating and cooling. Also may result in high utility bills.
|
| Test temperature differences |
This verifies efficient operation of the system to help lower utility bills and increase comfort. |
| Clean blower assembly |
By maintaining proper alignment and making sure all components are clean, you will ensure adequate airflow, lower utility costs and increase your comfort. |
| Clean and adjust burner assembly |
Dirty or improperly adjusted burners will result in excessive fuel usage and may cause damage to heat exchangers. |
| Examine heat exchanger |
A damaged or cracked heat exchanger could allow poisonous gases to enter your home. |
Contact Us Today for More Information!